Using it safely
General good practice for a belt sander (linisher). Your induction covers the specifics for the machine at our shed.
- ✓Check the belt trackingMake sure the belt is centred and tracking true before you start, and that guards are in place.
- ✓Sand on the down sideHold work against the part of the belt moving down towards the table so it pushes the piece down, not up at you.
- ✓Keep a firm gripHold the workpiece firmly and keep fingers well clear of the moving belt and disc.
- ✓Light, steady pressureLet the abrasive do the work. Too much pressure burns the timber and overheats the belt.
- ✓Mind the heatMetal and small parts get hot fast. Keep a tin of water nearby and watch for sparks near dust.
- ✓Never work aloneThis is medium-risk gear, so at least one other inducted member must be in the workshop with you.
- ✓Unsure? Ask a Duty OfficerAlways better to ask. They're happy to help and there's no silly question.
Before you start
An induction is required
Before using the belt sander (linisher) for the first time, you'll do a short, friendly hands-on induction with an experienced member. We'll walk you through setup, safe operation and how to stop safely, at your own pace.
Book one with a Duty Officer on any open day, or call the shed on 03 5750 1120. Already inducted? Remember the two-member rule still applies.
When it runs
Woodwork · Mon, Wed & Fri
Drop in during a woodwork session and one of the crew will get you started. All levels genuinely welcome.