Using it safely
General good practice for a mitre saw. Your induction covers the specifics for the machine at our shed.
- ✓Let the blade reach full speedWait for the saw to spin up before lowering it into the timber.
- ✓Hold the work against the fenceKeep the piece firmly against the fence and bed, with your hand well clear of the blade path.
- ✓Mind the no-go zoneKeep both hands outside the marked danger area. Clamp small or short pieces rather than holding them.
- ✓Let it stop before you liftWait for the blade to stop spinning before raising it and clearing offcuts.
- ✓Let offcuts fall freeNever reach for an offcut while the blade is moving.
- ✓Never work aloneThis is medium-risk gear, so at least one other inducted member must be in the workshop with you.
- ✓Unsure? Ask a Duty OfficerAlways better to ask. They're happy to help and there's no silly question.
Before you start
An induction is required
Before using the mitre saw for the first time, you'll do a short, friendly hands-on induction with an experienced member. We'll walk you through setup, safe operation and how to stop safely, at your own pace.
Book one with a Duty Officer on any open day, or call the shed on 03 5750 1120. Already inducted? Remember the two-member rule still applies.
When it runs
Woodwork · Mon, Wed & Fri
Drop in during a woodwork session and one of the crew will get you started. All levels genuinely welcome.