Using it safely
General good practice for a stick (arc) welder. Your induction covers the specifics for the machine at our shed.
- ✓Protect your eyes and skinHelmet down before you strike an arc. The flash burns eyes and skin fast.
- ✓Weld in a clear, dry spotNo flammables nearby, dry floor, and stand clear of anyone watching without a helmet.
- ✓Mind the fumesUse the fume extraction and keep the roller door open for airflow.
- ✓Hot metal stays hotMark or quarantine finished work. Use pliers, never bare hands.
- ✓Check leads and clampsInspect the earth clamp and cables before you start. Report any damage.
- ✓Never work aloneThis is medium-risk gear, so at least one other inducted member must be in the workshop with you.
- ✓Unsure? Ask a Duty OfficerAlways better to ask. They're happy to help and there's no silly question.
Before you start
An induction is required
Before using the stick (arc) welder for the first time, you'll do a short, friendly hands-on induction with an experienced member. We'll walk you through setup, safe operation and how to stop safely, at your own pace.
Book one with a Duty Officer on any open day, or call the shed on 03 5750 1120. Already inducted? Remember the two-member rule still applies.
When it runs
Welding · Fridays
Welding and fabrication runs on Fridays. A quick booking helps so someone can set you up safely.